data sheet part number 856534 810 mhz saw filter subject to change or obsolescence without notice rev a 06/08 triquint semiconductor, inc. page 1 of 5 features for wimax applications usable bandwidth 5 mhz high attenuation no impedance matching required for operation at 50 w single-ended operation ceramic surface mount package (smp) hermetic rohs compliant (2002/95/ec), pb-free package pin configuration surface mount 3.00 x 3.00 x 1.22 mm bottom view smp-12 6 5 4 3 2 1 single-ended configuration pin no. description 2 input 5 output 1,3,4,6 case ground 0.69 1.22 nom. 1.32 max. 0.75 0.60 1.50 0.75 3.00 3.00 dimensions shown are nominal in millimeters all tolerances are 0.15mm except overall length and width 0.10mm body: al 2 o 3 ceramic lid: kovar , ni plated terminations: au plating 0.5 - 1.0 m m, over a 2 - 6 m m ni plating pb
data sheet part number 856534 810 mhz saw filter subject to change or obsolescence without notice rev a 06/08 triquint semiconductor, inc. page 2 of 5 electrical specifications (1) operating temperature range: (2) -40 to +85 o c parameter (3) minimum typical (4) maximum unit center frequency - 810 - mhz maximum insertion loss 807.5 - 812.5 mhz - 4.6 6.0 db amplitude ripple (5) 807.5 - 812.5 mhz - 0.7 2.0 db group delay variation 807.5 - 812.5 mhz - 88 150 ns absolute attenuation 10 - 770 mhz 770 - 793 mhz 793 - 795 mhz 795 - 797 mhz 823 - 825 mhz 825 - 827 mhz 827 - 850 mhz 850 - 1500 mhz 1500 - 2500 mhz 50 30 20 10 10 20 30 50 35 54 48 41 32 32 41 48 54 38 - - - - - - - - - db db db db db db db db db source impedance (6) - 50 - w load impedance (6) - 50 - w notes : 1. all specifications are based on the triquint tes t circuit shown below 2. in production, devices will be tested at room te mperature to a guardbanded specification to ensure electrical compliance over temperature 3. electrical margin has been built into the design to account for the variations due to temperature d rift and manufacturing tolerances 4. typical values are based on average measuremen ts at room temperature 5. amplitude ripple is defined as the worst case di fference between the peak and adjacent valley withi n the defined frequency points 6. this is the optimum impedance in order to achiev e the performance shown test circuit: 50 w single-ended no impedance matching required 1,3,4,6 2 5 50 50 w ww w w ww w 50 w single-ended no impedance matching required
data sheet part number 856534 810 mhz saw filter subject to change or obsolescence without notice rev a 06/08 triquint semiconductor, inc. page 3 of 5 typical performance (at room temperature)
data sheet part number 856534 810 mhz saw filter subject to change or obsolescence without notice rev a 06/08 triquint semiconductor, inc. page 4 of 5 matching schematics 50 w single-ended no impedance matching required 1,3,4,6 2 5 50 50 w ww w w ww w 50 w single-ended no impedance matching required marking pcb footprint cj code marking date code jjjym logo id dot sawtek .96 3.20 sq 1.27 .38 .81 1.70 the date code consists of: jjj = julian day, y = last digit of year, m = manufacturing site code this footprint represents a recommendation only dimensions shown are nominal in millimeters tape and reel 3.25 section a-a 1.75 ?1.5 4.0 a 12.0 5.5 ?1.5 4.0 2.0 3.25 1.4 0.21 a ?102 ?20.2 ?13.0 2.0 direction of travel ?330 12.8 2.7 logo sawtek id dot dimensions shown are nominal in millimeters packaging quantity: 5000 units/reel
data sheet part number 856534 810 mhz saw filter subject to change or obsolescence without notice rev a 06/08 triquint semiconductor, inc. page 5 of 5 maximum ratings parameter symbol minimum maximum unit operating temperature range t -40 +85 o c storage temperature range t stg -40 +85 o c important notes warnings electrostatic sensitive device (esd) avoid ultrasonic exposure rohs compliance this product complies with eu directive 2002/95/ec (rohs) solderability compatible with jesd22-b102, pb-free process, 260c peak reflow temperature ( see soldering profile ) links to additional technical information pcb layout tips qualification flowchart soldering profile s-parameters rohs information other technical information triquints liability is limited only to the surface acoustic wave (saw) component(s) described in this data sheet. triquint does not accept any liabilit y for applications, processes, circuits or assemblies , which are implemented using any triquint compone nt described in this data sheet. contact information po box 609501 orlando, fl 32860-9501 usa phone: +1 (407) 886-8860 fax: +1 (407) 886-7061 email: info-product@tqs.com web: www.triquint.com or contact one of our worldwide network of sales offices, representatives or distributors pb
|
